Thermal Protective Coatings
![thermal-protective-coatings-img](https://minsolar.com.au/wp-content/uploads/2024/05/thermal-protective-coatings-img.jpg)
Super Therm®
Super Therm® is a water-borne combination of high-performance aliphatic urethanes, elastomeric acrylics, and resin additives which produces a tough, yet flexible coating film. Designed for performance and durability, Super Therm® contains 4 unique ceramics to block up to 95% of Solar Radiational Heat entering a structure due to Visual Light, Ultra Violet (UV), and Infrared (IR). Super Therm® is a flexible membrane with low permeability that can greatly reduce expansion and contraction of a roof (eliminate thermal shock) and prevent corrosion and surface deterioration.
Features
Reflects up to 95% of Solar Radiational Heat
Class A Fire Rating
20+ Year Lifespan Under Normal Conditions
Blocks Moisture and Air Infiltration
Environmentally Friendly
Characteristics
Product Chemistry
Ceramic & water based
Volume Solids
60%
VOC Level
67.2 g/L, 0.561 gal/lbs
Dry Time (at 70˚F)
30-60 minutes to tack free
Full Cure
2 hours at 40% rel. humidity
Typical Uses
As a one-coat insulation system on exteriors to block the migration of Solar Heat gain. (Roofs and side walls).
As an insulation system for interior applications to seal and block some of the IR heat loss.
As insulation for transportation vehicles, refrigerated containers, reefer trucks, and railroad cars when applied to the exterior.
Exterior application to reduce or eliminate condensation on HVAC systems, tanks, spheres, storage systems, and concrete walls.
As a system over metal, concrete, masonry, and wood to stop moisture penetration and corrosion.
Ability to resist dirt, mold, mildew, and pollution to increase longevity, and reduce surface maintenance.
As a topcoat over metal roofs, or an intermediate coat on flat roofs.
Applied over tent fabrics to provide insulation & remain flexible.
Application Methods
Super Therm® can be applied to metal, concrete, masonry and wood. The application can be spray, brush or roller. For specific instructions on surface preparation, mixing and application, please refer to the SPI’s application instructions for Super Therm®. This coating should never be applied at less than 17 mils wet (425 microns), 10.1 mils dry (250 microns), each coat.
Why Choose MinSolar?
When you partner with MinSolar, you're choosing more than just a solar supplier; you're choosing a trusted advisor and a committed partner in your journey toward energy independence. With our extensive industry experience, top-quality products, and unwavering commitment to customer satisfaction, we're here to guide you through every step of the solar transition process. From initial consultation to professional installation and ongoing support, we're dedicated to delivering tailored solutions that meet your specific needs and exceed your expectations. Join us in leading the charge toward a brighter, greener future with MinSolar by your side.
![2024-05-28 14_37_15-Minsolar _ Facebook](https://minsolar.com.au/wp-content/uploads/2024/05/2024-05-28-14_37_15-Minsolar-_-Facebook.jpg)
Hurry and get our $100 off voucher!
Just submit your name and email on the form below:
Get in Touch
If you have questions about our products or if you just want to say hi – We’d love to hear from you!
Call Us
0447 656 500
Our Location
Unit 2/7, Royce Court, Joondalup, Western Australia 6027