Solatherm PV Direct · Australian made

We heat and store your hot water with the sun — day and night.

A hot water system that is simple to install, runs silently, has no moving parts and no pumps — and needs no water plumbed on or through your roof.

No pumps, no moving parts No roof plumbing Runs without the grid 24-hour AC backup
Solatherm PV Direct hot water system
Dedicated PV arrayDC straight to the element
SilentNo fans, no compressors
Hot water, storedReady day and night
“

The system’s intelligent design and dedicated solar PV array is the only system that can provide the average 4-person household its hot water expense at a net zero cost over an average 12-month period.

MinSolar · Solatherm PV Direct

0Moving partsNothing to pump, wear out or service
0Roof plumbingNo water pipes on or through the roof
24hAC boost backupIndependent backup for cloudy runs
100%All electricNo gas, no combustion, no flue

How PV Direct works

Power goes from the panels straight into the element. That's the whole system — which is why there is so little to go wrong.

01

Dedicated PV array

Its own solar panels sit on the roof — panels only. No water, no pipes, nothing to leak.

02

DC straight to the element

The power runs directly into the heating element. No pump, no compressor, no inverter in between.

03

Heat is stored in the tank

Accurate temperature control heats and holds the water through the day, ready for the evening and the morning.

04

Hot water, day and night

An independent 24-hour AC boost sits behind it, so a run of grey days never leaves you short.

And nothing is wasted

Once the water is hot, the DC power can be switched to an inverter for use in the household, to a battery system, or to another DC appliance — so the array keeps earning its keep for the rest of the day.

Why choose PV Direct hot water

Simple to install, silent to run, and built for Australian homes.

Australian designed & made

Designed, made and owned in Australia, and built for Australian conditions.

Silent in operation

No fans, no compressors, nothing humming outside a bedroom window.

Runs without the grid

Can operate independently of grid power, which suits off-grid and rural sites.

No moving parts

The latest technology with nothing to pump, spin or wear out over time.

No roof plumbing

No expensive water plumbing on or through the roof — panels only.

No freezing issues

No frost damage risk in frost-prone areas, because there is no water on the roof.

24-hour AC boost backup

An independent backup element so you are never left without hot water.

Fits confined spaces

Installs indoors or outdoors where a heat pump or gas unit simply will not fit.

Accurate temperature control

Precise regulation, so the tank is not overheating and wasting energy.

Quick-connect installation

Dual-handed cylinder with quick-connect plumbing and electrical for flexible layouts.

Low maintenance costs

Little to service and little to fail keeps the running cost down year after year.

Strong in cold, clear weather

Performs well in cold climates as long as the sky is clear — it runs on light, not heat.

All electric — no gas Australian certified Flexible installation & design options Indoor or outdoor

Common questions

What happens on a cloudy day?

The tank stores the heat it made earlier, and an independent 24-hour AC boost sits behind the system for longer grey runs. You are not relying on the weather to get a hot shower.

Is this the same as solar hot water on the roof?

No. Traditional solar hot water pumps water up to roof-mounted collectors. PV Direct puts solar panels on the roof and sends the electricity down to the element — so there is no water on your roof, no pumps, and no frost risk up there.

Will it work in a cold climate?

Yes. It runs on light rather than ambient heat, so it performs well in cold conditions as long as the sky is clear. There are also no freezing issues in frost-prone areas.

Where can it be installed?

Indoors or outdoors, including confined spaces where a heat pump or gas unit will not fit. The dual-handed cylinder with quick-connect plumbing and electrical gives real flexibility in how it is laid out.

What happens once the water is already hot?

Nothing is wasted. The DC power can be switched across to an inverter for the household, to a battery system, or to another DC appliance, so the array keeps working for the rest of the day.

Can it run completely off-grid?

It can operate independently of the grid, which makes it well suited to off-grid and rural properties. Tell us about your site and we will confirm what your setup needs.

Free hot water from a roof that stays dry

Book a free energy review and we will size a Solatherm PV Direct system for your household, confirm where it fits, and put the numbers in writing. No cost, no obligation.

$100 Off voucher available 08 6388 8364 Unit 2/7 Royce Court
Joondalup WA 6027
Book a free energy review Download the brochure
CHAT